Pengo’s latest addition to the Revolution Series Drilling drives are the CS Models. These models compact and light weight and are designed to work with our General Purpose 2″ Hex Aggressor®, TriMax® and Severe Rock Ripper® augers. Combining this drive with the CS-2 Mount and your Pengo auger gives you a complete auger package.
- LIGHT WEIGHT COMPACT DESIGN
- ONE PIECE CAST HOUSING
- (1) CONNECTION AVAILABLE 2″ HEX
- UNIVERSAL SKID STEER BRACKET (BOBCAT)
- WARRANTY – 24 MONTH GEAR BOX, 12 MONTH HYDRAULIC
MOUNT for CS-2
This CS-2 Drive and Mount are sold as a unit. Couple your Aggressor®, TriMax® or Severe Rock Ripper® with this unit for a complete General Purpose drive package.
SPECIFICATIONS
| DISPLACEMENT | 15.4 CU IN |
| MOTOR TYPE | SINGLE SPEED, BI DIRECTIONAL |
| MOTOR OUTPUT | 1 1/4″ SPLINE 14T |
| MOTOR MOUNT | SAE A 2 BOLT |
| MOTOR PARTS | 7/8-14 UNF-2B O-RING |
| CROSS OVER | NA |
| GEARBOX | PLANETARY SINGLE STAGE |
| REDUCTION RATIO | 3.69:1 |
| OUTPUT SHAFT | 2″ HEX |
| INTERNAL OIL CAP | 25 OZ |
| OIL TYPE | SAE 80W90 GL-5 |
| MAX HOLE DEPTH | 8′ |
| MAX HOLE DIAMETER | 30″ |
| WEIGHT | 130 LB DRIVE / 300 LB WITH SSL MOUNT |
| MIN / MAX FLOW | 5 – 25 GPM |
| MAX PRESSURE | 3000 |
| MAX DIAM AUGER | 30″ |
SPEED
| FLOW GPM | SPEED |
| 10 | 41 |
| 15 | 61 |
| 20 | 81 |
| 25 | 102 |
TORQUE CHART
| PRESSURE | THEORETICAL |
| 1200 | 903 |
| 1400 | 1054 |
| 1600 | 1204 |
| 1800 | 1355 |
| 2000 | 1505 |
| 2200 | 1656 |
| 2400 | 1807 |
| 2600 | 1957 |
| 2800 | 2108 |
| 3000 | 2258 |
| 3200 | 2409 |
| 3400 | 2559 |
| 3600 | 2710 |
BIG DAVE REVIEW
This drive will fit on most medium and large frame skid steers. The flow range is 5 to 25 GPM. Keep in mind the max pressure or PSI is only 3000 PSI. 3000 Psi will work on most older skid steers but maybe a problem on the newer machines with higher pressures. The largest bit that can be used on this auger is 30″.
